Water Resistant Watches: Guide to Water Resistance
A watch is not water resistant unless stated on the dial or case back.
Most water resistant watches are not designed for prolonged active use in water.
Water resistance is stated as a depth (BAR, ATM, meters or feet) this means that it has been tested in a laboratory to withstand a static pressure for a short period only at the stated depth. The actual water pressure on the watch during use is greater than the static pressure. During diving into a pool the pressure on the watch is greater at the impact point with the water.
Certain chemicals in water can damage the watch seal as well as perfumes, aerosol sprays and other cosmetics.
Watches should be tested for water resistance every two years and gaskets replaced as necessary to maintain water resistance.
WARNING: Ensure that the crown / buttons are are returned to their normal operating position when the watch is to be in contact with water. On models with screw down buttons water resistance is lost when the crown is in the unlocked position.
Case or Dial Marking
Watch should not be worn whilst washing-up or showering etc.
Will withstand accidental splashes, rain etc. but not washing-up, or showering etc
3 BAR, 3 ATM, 30m, 100ft
Suitable for everyday use. Will withstand accidental splashes but not suitable for swimming.